Buy Cheap Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver From Here Now!
Black & Decker BDID1202 12 Volt Cordless Impact Driver - 4x the torque than other 12v drills for driving screws and other large fasteners with ease. 2x the speed of other 12v drills for drilling holes and driving screws faster. 35% more compact than other 12v drills for getting into tight areas. Impacting block provides high torque without the kickback. Includes: (2) 12v Batteries, (1) Charger, Kit box, 15 Hex shank accessories. Specs: Voltage - 12v. Torque - 800+ in lbs. 0-2800 BPM. 0-2600 RPM. Chuck Size - 1/4" Hex Shank.
Readmore
Technical Details
- 4x the torque and 2x the speed than other 12-volt drills for driving screws and other large fasteners- 1/4-inch chuck size (with hex shank)
- Provides over 800 inch-pounds of torque; operating at 0 to 2,800 BPM, 0 to 2,600 RPM
- 2-year limited warranty
- Included with impact driver: two 12-volt batteries, charger, kit box, and 15 hex shank accessories
See more technical details
By Marc Contreraz (Jamestown, ND)
I own this little guy along with a Makita 14.4 impact, and a Hitachi 18v Li-on impact, I love this drill for it's simple power, and weight, However the only drawback from this drill is it's batteries.
It has the best power to weight ratio of all 3 items I own, but the batteries can't hold up for more than 25 - 35 minutes of continuous use. I have 2 batteries and a very flimsy charger that came with it, and it takes 3 hours to charge the batteries. I have seen online that you can buy aftermarket 2.6 amphour batteries for this drill but the cost to get 2 of them and a smart charger is more than what I paid for the whole tool.
If you only drill a few small holes, or a few screws around the home than this would work for you, but if try to build a deck or work bench, you will not like this tool, or should I say the battery life. do yourself a favor and spend a few more bucks and go with Makita, or Hitachi, the two I own can drill 3" tin screws all day on one charge.
By Nicholas Ward
Wow, that's a lot of power. My 20 amp drill was able to spin it backwards, but this lightweight drill kept up pretty well when I used it to tighten 3/4 bolts.
It can also handle the slower drilling. Just pull the trigger half way. And it was about three or four uses before I figured out how to pull out spring loaded hex coupling to lock in the bit. It is the easiest, quickest "chuck" I have used.
I read several complaints about how noisy it is. It is noisy once the hammers kick in. For low torque jobs, its as quiet as any other drill. But it meets resistance with force. The hammers start pounding and that 3" deck screw is going in pre drilled or not! Har Har Grunt Grunt! Maniacal laughter..
This is a fun home drill that's great for small to med projects, like hanging pictures or installing a deck. Two batteries, a charger, a handful of bits, and a rugged case.
By Jesse Trotter (ROYSTON GEORGIA)
I BOUGHT THIS UNIT WHEN IT FIRST APPEARED AT HOME DEPOT FOR AROUND $30.00 AND ALL MY FRIENDS WANTED ONE WHEN THEY USED IT BUT HOME DEPOT HAD DISCONTINUED IT. NOW ONE BATTERY COSTS MORE THAN I PAID FOR DRILL ,CHARGER AND TWO BATTERIES. I REALLY LIKE THIS BETTER THAN ANY DRILL I HAVE AND I HAVE APP 14 IN USE IN SHOP. WHEN IM BUILDING CABINETS AND PORCH SWINGS ECT. I HAVE TO BE REAL CAREFUL BECAUSE IT WILL STRIP THE HEADS OFF THE SCREWS. I CAN BURY A SCREW IN A 2" BOARD WITH IT WITHOUT ANY STRAIN. LOVE THE DRILL. THANKS
By J. Morasch (Washington State)
I was supprised to read the other reviews. I have had my B&D impact driver for 6 Months now and I love it. Infact my cordless drill lost its spot in the Peg board because I use the impact driver for almost everything. I have driven up to 1/2" Lag bolts in to Pressure treated 4x4's without problems. When drilling it never twists on you, when it starts to bind up it goes into impact mode and pushes the bit through it. The one key that I found is do not push down on the back of the drill like you are used to, this slows it down. just apply slight pressure to hold the bit into the screw and let the impact do the work.
By Frankie Kam (San Francisco, CA USA)
The power is there if you work on it. The drill will slip a lot causing damage to the drill bits.
The craftman drill has 850 torque but does not slip.
The Black and Decker one is not a good tool to own even for the cheap price.
Images Product
Buy Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver Now
Buy Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver |
Cheap Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Low Price Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Best Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Order Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Good Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Lowest Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Save Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Discount Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Purchase Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Shop Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Buying Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver | Where Black & Decker BDID1202 12-Volt Ni-Cad Cordless Impact Driver
0 comments:
Post a Comment